• Silver DC power distribution module with terminal blocks and fuse protection
1 1

Professional Leisure Battery & DC to DC Charger Fitting Service (Lithium or Lead Acid Upgrades) | CCCAMPERS

Professional Leisure Battery & DC to DC Charger Fitting Service (Lithium or Lead Acid Upgrades) | CCCAMPERS

Certified In-House Workshop Installation

Safe, Reliable Off-Grid Power for Your Campervan

Avoid dangerous DIY wiring, high-resistance voltage drops, and flat vehicle starter batteries. All electrical systems are fitted to strict BS EN 1648-2 low-voltage safety standards by accredited AWS (Approved Workshop Scheme), National Caravan Council (NCC) Academy, and IMI TechSafe Level 3 automotive electrical technicians.

🔋 Step 1: Choose Your Battery Bank & Compressor Fridge Runtime

Select the chemistry that fits your off-grid camping style. Below is the estimated runtime when powering a standard 12V compressor fridge (avg. 35–40Ah / 24h) alongside phone charging and LED lighting:

110Ah Deep-Cycle Lead-Acid (Budget Baseline)
• Usable Energy: ~55Ah (50% maximum safe discharge)
• 12V Fridge Runtime: ~1 to 1.5 Days (requires daily driving or mains hook-up to recharge and prevent cell degradation)
• Safety Spec: Fitted with a dedicated heavy-duty acid-containment tray conforming to BS EN 1648-2 safety standards.
100Ah Smart LiFePO4 Lithium + Integrated 20A Smart Charger (Weekend Off-Grid Touring)
• Usable Energy: ~90Ah (90% usable depth of discharge)
• 12V Fridge Runtime: ~2 to 3 Days continuous wild camping without engine start
• Key Benefit: Ultra-lightweight, 3,000+ cycle lifespan, rapid charge acceptance, and flat voltage discharge curve.

⚡ Step 2: Split Charging Compatibility

  • Heavy-Duty Voltage-Sensing Relay (VSR): Paired with 110Ah Lead-Acid setups for older vehicle platforms (Euro 4 and earlier) featuring traditional fixed-voltage alternators.
  • Intelligent 30A Smart DC-to-DC Upgrade: Higher-output smart charging option for faster turnarounds on driving cycles.

💡 Step 3: 12V Power Distribution & Fuse Box Setup

  • Base Installation Only: Includes primary high-amperage safety fusing, battery terminal lugs, and main battery master isolation switch.
  • Standard 6-Way Fused Distribution Block: Marine-grade, individually fused blade fuse block securely mounted and pre-wired—ready for you to connect your 12V compressor fridge, water pumps, diesel heater feeds, and USB sockets.
  • Fused Flush Living Area Switch Panel: Includes a fitted flush-mounted living area fascia featuring individual rocker switches, a real-time digital LED voltmeter, a dual USB fast-charge port, and a 12V socket.
  • Full Converter Power Distribution Unit (PDU) & Wiring Harness System: Complete integrated power management solution including:
    • 230V Mains Integration: 25A Type-A RCD, 16A MCB feeding 4 x 230V outputs, with a dedicated 20A (230V-to-12V) smart charger/power supply.
    • 12 Individual Fuse-Protected Circuits: Pre-wired channels for Lights (x2), Auxiliary (x2), 12V Fridge, Hob/Oven, Heater, Pump, Toilet, and Permanent lines.
    • Digital Flush Control Fascia: Master power switch, lighting control, awning light connection (2A rated), and an integrated digital voltmeter.
    • Pre-Formed Loom: Complete structured breakout loom for a clean, professional camper conversion.

📍 In-Person Workshop Installation

This is a fully fitted, in-house workshop service carried out by appointment at our dedicated conversion facility:

CCCAMPERS Fitting Hub:
Woodside Business Park, Beach Hay, Bayton, Kidderminster, DY14 9NE

How Booking Works: Select your battery setup and distribution options above, then proceed through checkout. Our workshop coordination team will contact you within 2 to 5 business days to confirm vehicle specifics and schedule your physical fitting date.
Battery Type
DC to DC Charger type
12V Power Distribution & Fuse Box Setup
£699.00 GBP
£699.00 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
View full details